IBM RS/6000 7025 manual Mode, ReturnsRemotetoOff

Remote	Mode		: The remote mode, when enabled,	allows	the	system to		start	from
the	defined boot device. This mode is ideal for network						servers	and	other	computers
that	operate unattendedmust. Youset a power-on password before						you can enable
the	remote mode. When the remote mode is			set,	theRemoteicon		changes	to
<On> .
If	you	remove the power-on password, the		remote	mode	is	automatically		reset,	and
the	icon		returnsRemoteto<Off> .

Privileged-Access Password : The privileged-access password protects against the unauthorized starting of the system programs.

When you select the Entry icon, a screen					with 8 empty boxes appears. Type your
password in		these	boxes. You can use any		combination		of up to eight	characters
(A–Z,	a–z,	and 0–9)		for your password. As	you type	a character, a		key appears in
the	box.

Press Enter when you are finished; you are required to type the password again for verification.

If you make a mistake, Escpresskey theand start again.

3-14IBM RS/6000 7025 F50 Series User's Guide