e. Move

the

carrier latch

to

the locked position. If the carrier will

not

lock,

ch

that

the

drive carrier

is

fully seated

in the backplane. When the

drive

carrier

is fully seated and power

is turned on,

the green LED on the drive

carrier

will

illuminate.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.See “Disk Drive Status LED States” on page 2-18 for information on disk drive lights.

5. Go to

Table A-2

on page A-4

to

record the drive location for the drive; then

return

here to

determine

your

next step.

6. If you have other drives to install, go to page 5-43.

7. If you have other procedures to perform, refer to “Option List” on page 5-17.

8.If you do not have any other procedures to perform, replace the covers as described in “Replacing the Front Covers” on page 5-93.

5-54IBM RS/6000 7025 F50 Series User's Guide

Page 198
Image 198
IBM manual 54IBM RS/6000 7025 F50 Series Users Guide