IBM RS/6000 7025 manual System Management Services3-13

Press Enter when you are finished; you are required to type the password again verification.

If you make a mistake, Escpresskey theand start again.

After you have entered and	verified the password, the power-on password icon
flashes and changes to the	locked position to	indicate	that	the power-on password
set.
If you previously had set	a power-on password	and want	to	remove it, select th
Remove icon.

Note: If yfourgetthe power-on password, you have to remove the battery for at least 30 seconds to disable this password. See Appendix B, “Replacing the Battery” on page B-1 for details.

Attention: After		you	remove the battery,			you must reconfigure your system (bootli
IP	parameters,	console		information,	support	processor, etc).
A	password can	be	set	only after	the	system is turned off and on again.

Chapter 3. System Management Services3-13