IBM manual 50IBM RS/6000 7025 F50 Series Users Guide

9. If you		installed		a removable-media drive in bay B1	or	bay		B2,	remove	the cover
plate from the front cover. A cover plate (complete					bezel)		is	in	place	in	the
system's front cover, which you removed earlier. Remove the							cover		plate	by
pushing it,			gently,	out of the front cover.
Note:	If	a	disk	drive is installed into Bay B1 or	Bay	B2	the		removable		bezel
should	not	be removed.

10. Go to Table A-2 on page A-4 to record the drive location (diskette interface devices do not require a SCSI ID); then return here to determine your next step.

11. If you have other drives to install, go to page 5-43.

12. If you have other procedures to perform, refer to “Option List” on page 5-17.

13.If you do not have any other procedures to perform, replace the covers as described in “Replacing Both the Front and Side Covers” on page 5-96.

5-50IBM RS/6000 7025 F50 Series User's Guide