IBM RS/6000 7025 manual Did, Menu display?

Step 12

Did	the Diagnostic Selection	Menu display?
NO	IfProblem Determination was selected from the		Diagnostic Mode
	Selection menu, and if a recent error has		been logged in the error log,
	diagnostics	automatically begin testing the	resource.

Follow the displayed instructions.

If the No Trouble Found screen is displayed, press Enter.

If another resource is tested, repeat this step.

If the Diagnostic Selection menu is displayed, go to “Step 13.”

If an SRN is displayed, record it, and go to “Step 14.”

YES Go to “Step 13.”

Step 13

The All Resources option checks most of the configured adapters and devices.

Notes:

1.ISA adapters cannot be detected by the system. The ISA adapter Configurati Service Aid allows the identification and configuration of ISA adapters for Standalone Diagnostics. ISA adapters must be identified and configured before they can be tested.

Select and run the diagnostic

tests

on the resources you are having problems wit

select AlltheResources option check all of the configured resources. Find the

response in the following table

and

take

the

Action

for

it.

Diagnostic

Response

Action

An

SRN

is displayed.

Go

to

“Step

14.”

The

system

hangs.

Report SRN 109-200.

The

Testing

Complete

menu

andNo therouble

Press

Enter

and

continue

with

the testing.

was found message

is

displayed, and

you

have

not

tested

all

of

the

resources.

The

Testing

Complete

menu

andNo therouble

Go

to

“Step

17.”

was found message displayed and you

have

tested all

of the

resources.

Chapter 9. Hardware Problem Determination9-7