Step 2. Loading the Diagnostics
1. Stop all application programs running on the operating system.
2.Stop the operating system.
3.Turn the power off.
4.If you are loading the Standalone Diagnostics and running them from an ASCII terminal:
ŸThe attributes for the terminal must be set to match the defaults of the diagnostics.
Ÿ If | you need to change any | settings, record | the normal settings, and be sure | |||
the | terminal | attributes | are | set | to work with | the diagnostics. If needed, see |
“Running the | Diagnostics | from | a TTY | Terminal” on | page | |
Ÿ Return to substep 5 when you finish checking the attributes.
5. Turn the power on.
a. When | the | keyboard indicator appears, press | F5 on the | direct | attached | |
keyboard | (5 on the ASCII keyboard) to load | the | Standalone Diagnostics or | |||
F6 on | the | the | ASCII | terminal | keyboard) to | |
load | the | Online Diagnostics. |
|
|
|
|
b. Enter any requested passwords.
c. Follow any instructions to select a console.
6. When | the | Diagnostic | Operating Instructions display, go to Step 3. If you are |
unable | to | load the | diagnostics, go to “Problem Determination When Unable to |
Load | Diagnostics” on | page | |
