Installing a Scsi Disk Drive in Bank C, D, or E

Installing a SCSI Disk Drive in Bank C, D, or E.

Notes:

ŸSCSI IDs are automatically assigned by the backplane for each bank.

Therefore, no address jumpers are required on the drives.

Ÿ	1.6	inch	half-high (9.1 GB)			drives require two bays for each drive.
Ÿ	SCSI	disk	drives	and	SSA disk	drives	are	not	interchangeable.
Ÿ	Before		installing	disk	drives	in bank	D,	you	must also order:

– A disk drive backplane for bank D.

Ÿ Before installing disk drives in bank E, you must also order and install:

– A disk drive backplane for bank E

– A SCSI PCI adapter that drives Bank E.

– A SCSI cable that connects the SCSI PCI adapter to Bank E.

To order, contact your authorized reseller or marketing representative.

ŸAfter the backplane is completely installed, you do not have to turn off

system to		install additional hot-swappable		disk drives. However, you
must	turn off the system when		performing	the steps that involve installing
or	removing	backplanes, cables,	adapters,	memory, and CPU cards.

Chapter 5. Installing Options5-51