IBM RS/6000 7025 manual Bulkhead Cables Into the three retainers

12.If you are using an internal SSA cable, connect the SSA cable to the SSA adapter. ReferPCIto SSAthe4-Port RAID Adapter InstallationforGuide

information	on	connecting the SSA	cable	to	the SSA adapter. The cable should
be routed up and placed in the cable					holders under the top of the system
routed through the top cable			exit	hole	beside the fan assembly. Continue wit
step 14	on	page 5-74.

13. If you	are	using	the	external		SSA	bulkhead	cable:
a. Remove	the	bulkhead		plate at		the	rear	of the system.
b. Attach	the	SSA bulkhead			cable	to	the inside rear of the system using the
screws	that	you	removed		from	the	plate.

c. Apply the three cable retainers as shown in the illustration.

Attention:	The		cable retainers		must be applied with the clamp opening
towards	the		I/O planar	cover	against the inside lip away from the I/O pl
cover,	as	shown.
d. Place	the	SSA	bulkhead	cables	into the three retainers.

Chapter 5. Installing Options5-73