timeout 6ð
done
retry: | send "A/" | # Repeat the previous command. |
# Expect a connection response.
expect "16\r" or "15\r" or "14\r" or "12\r" or "1ð\r" or "5\r" or "1\r" busy "7\r" timeout 6ð
| done |
|
|
disconnect: | delay 2 | # Separate from previous data. | |
| |||
| send "+++" | # Assure command mode. | |
| delay 2 | # Allow mode switching delay. | |
| send "ATHðT\r" | # Set modem | |
|
| # (i.e., hang up). | |
| ignore "ð\r" or "OK\r" timeout 2 | # Ignore modem response. | |
| send "ATEðQ1\r" | # Initialize modem: Echo OFF, | |
| ignore "ð\r" timeout 1 | # | Disable responses. |
|
|
| |
| done |
|
|
condin: | send "AT&F1QðT\r" | # Reset modem. Select profile 1 | |
| ignore "ð\r" or "OK\r\n" timeout 2 | # Ignore modem response. | |
| send "ATEðT\r" | # Initialize modem: Echo OFF, | |
| expect "ð\r" or "OK\r\n" timeout 2 | # | Enable responses (Numeric), |
| send "ATQðVðXðT\r" | # | Limit response codes. |
| expect "ð\r" timeout 2 | # Confirm commands successful. | |
| send "ATSð=2\r" | # Set AutoAnswer ON | |
| expect "ð\r" timeout 2 | # Confirm command successful. | |
| send "AT&C1&D2&R1\r" | # Detect carrier and DTR, | |
|
| # | Ignore RTS. |
| expect "ð\r" timeout 2 | # Confirm command successful. | |
| done |
|
|
# Ignore first ring.
# Pick up second ring
# or timeout.
# Expect a connection response.
expect "16\r" or "15\r" or "14\r" or "12\r" or "1ð\r" or "5\r" or "1\r" timeout 6ð
| done |
|
|
page: | send "ATDT%N,,,,%R;\r" | # %N = pager call center number | |
|
| # Add enough commas to wait for | |
|
| # time to enter paging number. | |
|
| # %R = paging number | |
| expect "ð\r" timeout 6ð | # Confirm successful command. | |
|
|
| |
| delay 2 | # Wait before hanging up. | |
| send "ATHðT\r" |
| # Hang up. |
| expect "ð\r" timeout 2 | # Confirm successful command. | |
| done |
|
|
ripo: | send "AT&F1QðT\r" | # Reset modem. Select profile 1 | |
| ignore "ð\r" or "OK\r\n" timeout 2 | # Ignore modem response. | |
| send "ATEðT\r" | # Initialize modem: Echo OFF, | |
| expect "ð\r" or "OK\r\n" timeout 2 | # | Enable responses (Numeric), |
| send "ATQðVðXðT\r" | # | Limit response codes. |
| expect "ð\r" timeout 2 | # Confirm commands successful. | |
| send "ATSð=ð\r" | # Set AutoAnswer OFF | |
| expect "ð\r" timeout 2 | # Confirm command successful. | |
| send "AT&C1&D2&R1\r" | # Detect carrier and DTR, | |
|
| # | Ignore RTS. |
| expect "ð\r" timeout 2 | # Confirm command successful. | |
| done | # RI Power On enabled. | |
