
Step 3
This step attempts to load Online Diagnostics in service mode.
1.Turn the power to off.
2.Turn the power on.
3. If the keyboard indicator appears, press F6 on the direct attached keyboa on the ASCII keyboard to indicate that diagnostics are to be loaded.
4. Enter any requested passwords.
5. Follow any instructions to select a console.
6. Wait until the diagnostics load or the system appears to stop.
Did the diagnostics load?
NOGo to “Step 5.”
YES Go to “Step 6.”
Step 4
This step attempts to load the Standalone diagnostics.
1.Turn the power to off.
2.Turn the power to on.
3. Insert the diagnostic
4. If the keyboard indicator appears, press F5 on the direct attached keyboa on the ASCII keyboard to indicate that diagnostics are to be loaded.
5. Enter any requested passwords.
6. Follow any instructions to select a console.
7. Wait until the diagnostics load or the system appears to stop.
Did the diagnostics load?
NOGo to “Step 5.”
YES Go to “Step 6.”
Chapter 9. Hardware Problem