5.To change the values of the serial interface parameters, fill in the marker ( ) beside the value you want to set with a black or blue ball-point pen or a fiber-pen.

Do not use pencils.

WORD LENGTH

( )

( )

 

 

disabled *

enabled

 

BAUD RATE

( )

( )

 

 

disabled *

enabled

 

PARITY BIT

( )

( )

( )

 

DTR

XON/XOFF* XON/XOFF + DTR

If more than one value is set for a parameter, the printer ignores these parameters and

maintains the currently set value.

Do not fill in the marker beside the title of the preprinted form, otherwise the printer will not be

able to read that page.

6.Once the serial interface parameters have been assigned, insert the sheet back into the printer.

7.The printer reads the selected values on the configuration sheet and sets them. The settings are confirmed by a # symbol printed on the left of the corresponding marker.

The printer then returns to normal functioning mode.

For a complete description of the printer setup procedure see the paragraph “Printer Setup”

later in this manual.

27