
Printing a Test Page
It is now useful to test, if the printer has been correctly installed. For this purpose print the self test page as follows.
1.Press the ON LINE key while powering the printer on and hold the key pressed until all leds turn briefly on.
2.Insert a single sheet in A4 or Letter format.
The printer prints the
SELF TEST
PS40T: Code Version Vx.x xxxxxxxx CharGen:xxxxxxxx ver. x.xx
CONFIGURATION SETUP
PROGRAM |
| progr.1 | INTERFACE TYPE | automatic | ||
PROGRAM LOCKED | no | INPUT BUFFER | 16 Kb | |||
ERROR BUZZER | 1 beep | IGNORE PE | enabled | |||
JOB BUZZER | no beep | AUTOFEED SIGNAL | disabled | |||
SECURITY | MODE | enabled | disabled | |||
AUTO | GAP | OFFSET | +0.000 mm | BUFFER | CONTROL | XON/XOFF |
GET EDGE QUOTE | 1/2” | ROBUST | XON | enabled | ||
SKIP | PERFORATION | disabled | WORD LENGTH | 8 bit | ||
TEAR | ADJUST | +0,00 mm | BAUD RATE | 9600 bps | ||
|
|
|
| PARITY | BIT | none |
28