Setup Parameter | Values | Description |
TEAR MODE | auto 1s, auto 2s, |
| auto 3s, auto 4s, |
| auto 5s, manual, |
| no tear/reverse |
Selects the way the tear mode is performed. Selecting auto 1s, auto 2s, auto 3s, auto 4s, or auto 5s, the printer moves the paper in the
MANUAL LOADING | enabled, disabled | Selects the manual loading mode. Setting it to enabled the printer | |||
|
| loads any kind of document according to the described |
| ||
|
| procedures. Select | disabled |
| |
|
| , when a more precise paper |
| ||
|
| alignment is necessary. With this selection it is not possible to load | |||
|
| documents with a width of less than 90 mm. |
| ||
|
|
| |||
ALIGN MODE | fast, normal | Selects the paper alignment mode. Selecting fast the printer | |||
|
| performs less checks on the alignment, whereas, if you need a | |||
|
| particularly precise alignment of the documents, select normal. | |||
|
|
| |||
GAP MODE | auto, fix | Selects, whether the print gap is sensed for each inserted sheet | |||
|
| auto | ) or only for the first sheet after the printer power on ( | fix | |
|
| ( | ). | ||
|
| The print gap is sensed separately for the cut sheet and the fanfold | |||
|
| paper. |
|
| |
|
|
| |||
AUTO | no autoEM, 0.25 | Selects the emphasized print mode when the loaded paper is | |||
EMPHASIZED | mm, 0.35 mm, | thicker than the selected value. |
| ||
| 0.45 mm, 0.55 mm |
|
|
|
|
47