Paper Specifications
The documents must all conform to the following characteristics:
∙Use paper matching the indicated characteristics.
∙They must have well defined top and left edges, with a square angle tolerance of 0.1° on all edges.
∙The paper must not have holes, perforations, folds or tears anywhere within the print area of the document.
∙The radius on a corner of the form must be within 9.5 mm from the left or right edge.
∙The form to be printed must not contain foreign material.
∙Form opacity must be at least 75%. Forms with a lower opacity may cause feed errors.
∙Never print on documents with metallic or hard plastic fasteners or staples, they may damage the printer.
∙To get the maximum print contrast you should print on white or light colored paper. You may overstrike to improve the low contrasting paper.
∙It is preferable to use single and multiple documents with the fibre running in the insertion direction of the printing unit.
∙Recycled paper is permitted on principle.
∙It is preferable to print on multiple forms with a narrow glue strip or
57