without (no).
Setup Parameter | Values | Description |
|
|
|
| |
PRINT DIRECTION | unidir., bidir., | Selects the printing direction of the print head: unidirectional | |||||
| sw control | ( | unidir | bidir |
|
| sw |
| .), bidirectional ( | .) or selected via software ( |
| ||||
|
| control |
|
|
|
| |
|
|
| ). |
|
|
|
|
EJECT ON FF | no, yes |
|
|
|
|
| no |
Performs a form feed according to the selected page format ( ) or | |||||||
|
| ejects a cut sheet loaded into the printer ( | yes | ). |
| ||
|
|
|
| ||||
|
|
| |||||
CUT SHEET EJECT | on front, on rear | Selects whether the cut sheet loaded into the printer is ejected | |||||
|
| towards the front or the rear of the printer. The selection of the paper | |||||
|
| ejection towards the rear of the printer should be selected only for | |||||
|
| paper with a length of at least 14 cm (5,5 inch). |
| ||||
|
|
| |||||
PARK MODE | immediate | When pressing the PARK key or receiving a park command, the | |||||
|
| printer immediately parks the paper. |
|
|
| ||
| manual imm. | When pressing the PARK key, the printer automatically parks the | |||||
|
| paper. When receiving a park command via software: |
| ||||
|
| 1. If the current page is not empty (there is printing data or paper | |||||
|
|
| movement commands have been issued), a form feed is | ||||
|
|
| performed. |
|
|
|
|
|
| 2. The paper is moved to the |
| ||||
|
| 3. The P1, P2, P3 and P4 leds blink. |
|
|
| ||
|
| When the ON LINE key is pressed the printer parks the paper. | |||||
| after tear | When pressing the PARK key or receiving a park command via | |||||
|
| software: |
|
|
|
|
1. If the current page is not empty (there is printable data or paper movement commands have been issued), a form feed is
45