handling is faster.

 

 

 

 

 

 

Setup Parameter

Values

Description

 

 

 

AUTO GAP OFFSET

-0,075 mm, -0.050 mm,

Sets the automatic gap offset to one of the given values.

 

-0.025 mm,

 

 

+0.000 mm, +0.025

 

 

mm, +0.050 mm,

 

 

+0.075 mm, +0.100

 

 

mm

 

GET EDGE QUOTE

0/2”, 1/2”, 2/2”, 3/2”,

Sets the position in which the left paper edge is checked. If

 

4/2”, 5/2”, 6/2”, 7/2”

set to 0, the check is performed at the first line. The other

 

 

values correspond to the physical distance from the first line.

 

 

 

SKIP

disabled, enabled

If the passage of the paper perforation under the print head is

PERFORATION

 

critical, select enabled to avoid the paper being torn. The

 

 

print head lifts up during the paper passage. If disabled, the

 

 

print head stays in position.

 

 

 

TEAR ADJUST

-0,85 mm, -0,56 mm, -

Sets the paper tear-off position by aligning the paper with the

 

0,28 mm, +0,00 mm,

tear-off edge .

 

+,28 mm +0,56 mm,

 

 

+0,85 mm

 

 

 

 

38