If you press the ON LINE key:

∙the printer self-test is printed. See “Printing a Test Page ” before in this manual. In this way it is possible to check the current printer parameters.

∙once the self-test is finished, the printer remains in Setup Mode.

If you press the PROGRAM key:

∙the Px leds change and you can select the Setup Page you want to print as follows:

P1

 

 

 

P1

 

 

P2

 

 

All setup pages

P2

 

Program 2 page

P3

 

 

P3

 

 

 

 

 

 

P4

 

 

 

P4

 

 

 

 

 

 

 

 

 

P1

 

 

 

P1

 

 

P2

 

 

Configuration page

P2

 

Program 3 page

P3

 

 

P3

 

 

 

 

 

 

P4

 

 

 

P4

 

 

 

 

 

 

 

 

 

P1

 

 

 

P1

 

 

P2

 

 

Program 1 page

P2

 

Program 4 page

P3

 

 

P3

 

 

 

 

 

 

P4

 

 

 

P4

 

 

 

 

 

 

 

 

 

 

= lit

 

 

 

= unlit

The printer setup forms contain all printer parameters and the values that can be set. The current value is indicated by an asterisk (*).

For a detailed description of the parameters and the settings see “Setup Parameters” later in

this manual.

32