Ovideon user manual Can I connect the AVIAh to external A/V equipment?

Before using

Can I connect the AVIAh to external A/V equipment?

Yes. You may connect other Video and Audio devices such as a TV receiver, DSS, or VCR to the AV IN Connector.

MODE

Settings for external input are referred to Page 49. (When recording)

To record while watching a program, press the REC button. To end the recording session, press the REC button again. The filename will vary for a recorded file depending on the external input signal.

1.A Video signal will be saved as VID_0000.ASF. Adding another video recording will increase the file number by one. E.g. VID_00001.ASF.

2.A TV signal, when recording via the antenna, will be saved as A0000000.ASF, whereas C0000000.ASF is for cable recordings. Additional recordings will increase the file number by one.

(The 3-digit numbers immediately following the A and/or C in the file name will denote the channel that was recorded. Example: C0350002.ASF means that the recording was made from Cable Channel 35 and is the second recording.)

You may select to record in ASF or JPG file format in the system set-up menu of the Other Function sub-menu (Page 38). If for example the REC button is pressed while watching TV and the JPG recording format is selected, a frame of the incoming signal will be captured and will be saved as a JPG file.

When viewing a file stored in the AVIAh on any external AV equipment (TV, monitor) (OUT)

Be sure to use the cable supplied with this unit.

Settings for output through the OUT terminal is referred to on Page 37

OLED Display, Output Color System

18