4. Chain

-Ensure chain is oiled, clean and runs smoothly.

-Extra care is required in wet or dusty conditions.

5. Bearings

-Ensure all bearings are lubricated, run freely and display no excess movement, grinding or rattling.

-Check headset, wheel bearings, pedal bearings and bottom bracket bearings.

6. Cranks and Pedals

-Ensure pedals are securely tightened to the cranks.

-Ensure cranks are securely tightened to the axle and are not bent.

7. Derailleurs

-Check that front and rear mechanisms are adjusted and function properly.

-Ensure control levers are securely attached.

-Ensure derailleurs, shift levers and control cables are properly lubricated.

8. Frame and Fork

-Check that the frame and fork are not bent or broken.

-If either are bent or broken, they should be replaced.

9. Accessories

-Ensure that all reflectors are properly fitted and not obscured.

-Ensure all other fittings on the bike are properly and securely fastened, and functioning.

-Ensure the rider is wearing a helmet.

10

Page 17
Image 17
Pacific Cycle HF3305 manual Chain, Bearings, Cranks and Pedals, Derailleurs, Frame and Fork, Accessories