Screw in the removal tool.
Turn the screw bolt clockwise.
3.Screw the removing tool into the crank and tighten.
4.Turn the screw bolt down until the crank comes away from the axle.
Cotterless Crank Replacement:
1.Replace the crank arm onto the axle.
2.Tap the crank arm lightly with a mallet.
3.Refit the washer and tighten flange nut or bolt securely to a torque of 27Nm.
4.Replace the dust cover
Position the crank on the axle.
Lightly tap the crank onto the axle.
Adjustment After Use:
1.Remove dust cap.
2.Tap the crank arm lightly with a mallet.
3.
New cotterless cranks may become loose with initial use. Perform the following task after several hours of riding, and repeat it two or three times after further use. Cranks should then remain tight.
Tighten the flange nut.
Replace the dust cap.
86
