3.While holding the shoe against the rim, tighten the shoe fixing nut.

5.Adjust the balance with the spring tension adjustment screws.

1 mm

5 mm Allen key

 

4.Pass the inner cable through the inner cable lead. Set the cable with a clearance

of 1mm between each brake pad and the rim, tighten the cable fixing bolt.

5 mm Allen key

B C

B + C = 2 mm

53

1 mm

1 mm

Spring tension

Spring tension

adjustment screw

adjustment screw

6.Depress the brake lever about 10 times as far as the grip and check that everything is operating correctly and that the shoe clearance is correct before using the brakes.

Depress about 10 times

Page 60
Image 60
Pacific Cycle HF3305 manual Adjust the balance with the spring tension adjustment screws