Replacing the LCD Module

1.Turn the computer over. Align the LCD hinges with the lower cover and replace the LCD module.

2.Replace the four securing screws (two each side), starting with the left side hinge. Ensure that the LCD cables are not trapped in the hinges.

NOTE: The securing screws differ in size: Red callout—M2.5*8, Green callout—M2.5*5.

3.Run the MIC cable along the cable channel as shown, using all the available cable clips.

4.Reconnect the MIC cable to the Mainboard as shown.

126

Chapter 3

Page 136
Image 136
Packard Bell LJ77, LJ75 manual Replacing the LCD Module