1515151515 | 15 |
USB Board
To remove the USB board, first remove the top cover (see Top Cover on page 10), and then do the following:
1.Release the white clip securing the USB board cable and disconnect it from the header on the main board.
Fig. 23 Releasing the USB board cable.
2. Remove the two screws securing the USB board.
Fig. 24 Location USB board screws.
3. Clear the cable and remove the USB board.
Note: Optionally, you can disconnect the other end of the flat cable from the USB board.
Main Board
To remove the main board, remove the battery (see Battery on page 4), remove the hard disk drive (see Hard Disk Drive on page 4), remove the memory (see Memory on page 5), remove the CD/DVD drive (see Optical Disk Drive on page 6), remove the LCD assembly (see LCD Assembly on page 12), remove the speakers (see Speakers on page 13), remove the Bluetooth module (see Bluetooth (Optional) on page 14), remove the USB board (see USB Board on page 15), and then perform the following steps:
Packard Bell EasyNote MT Disassembly Manual
