2525252525 | 25 |
Note: In Fig. 41, the screws in each of the lower corner are covered by cables.
3. Carefully pry open the LCD bezel; it has been clicked into place.
Inverter Board
To remove the inverter board, first remove the LCD bezel (see LCD Bezel on page 24), and then do the following:
1. Disconnect the cable on both ends of the inverter board.
Fig. 42 Location of inverter board.
2.Remove the screw securing the inverter board (see Fig. 42).
3.Extract the inverter board.
LCD Panel
To disassembly the LCD panel, remove the LCD bezel (see LCD Bezel on page 24), and then perform the following steps:
1.Disconnect the cable on both ends of the inverter board (see Fig. 42).
2.Remove the two screws securing the top bracket and remove the bracket.
Fig. 43 Location of bracket screws.
Packard Bell EasyNote MT Disassembly Manual
