2626262626 | 26 |
3.Remove the ten screws securing the side brackets (five screws on each side) and remove the brackets (see Fig. 43).
4.Separate the LCD panel from the back cover.
5.Disconnect the LCD cable.
Fig. 44 Location of LCD cable connector.
6. Remove the side brackets (four screws on each side) from the LCD panel.
Webcam/Microphone
To remove the webcam and microphone, first remove the LCD panel (see LCD Panel on page 25), and then do the following:
1. Disconnect the cable from the header on the module.
Fig. 45 Location of webcam connector.
2.Carefully remove any adhesive tape securing the module (see Fig. 45).
3.Extract the webcam/microphone module.
Packard Bell EasyNote MT Disassembly Manual
