Note:
You may quickly select signal input for the PIP frame by using the P.S. button.
Changing Channels for the PIP Frame
When the PIP frame is in TV mode, press the CH or CH button (PIP) to change channels
When you press the CH or CH (PIP), the unit changes channels in sequence. You will see all the channels that the unit has memorised.
You will not see channels that were erased.
30
PIP
Source
H Position V Position Size
PBP
RF
Note:
You may quickly open or close PIP frame by using the PIP button directly.
Audio is from the main picture only.
Selecting the Signal Input for the PIP Frame
1 Press Menu to display the menu main page.
2 Press CH+ or CH- repeatedly to select PIP item.
3 Press Enter to access the submenu.
4 Press CH+ or CH- repeatedly to select Input item.
5 Press Enter repeatedly to select signal input for the PIP frame.
You may select RF, Video1, Video2, YPbPr1 or YPbPr2 for the PIP Frame.
On
Press Enter to select On or Off.
4
Press Enter to access the submenu.
The PIP item will be highlighted automatically.
PIP
Source
H Position V Position Size
PBP
1 Press Menu to display the menu main page.
2 Press CH+ or CH- repeatedly to select PIP item.
3
PIP Operations
The PIP function is available only when the main frame is in VGA/DVI mode and the aspect ratio is in 16:9 and the vertical frequency is 60 Hz.
Viewing the PIP
