Home Cinema Power Control Software Instructions (continued)
LOG MENU
1. Log Display:
This window displays the information as selected by the Event, Closed Application Information, or Data Record option buttons.
2.Event: When this option is selected, the log will display a list of events such as power failure, program start, and program end.
3.Closed Application Information: When this option
is selected, the log will display the names and location of any files that were
4. Data Record: When this
option is selected, the log will dis- play a record of the items that are shown in the main window.
5.OK: Closes the window and saves any changes.
6.Cancel: Closes
the window without saving any changes.
7.Clear: Clears the selected log.
Battery Features
Testing The Battery Backup Function
Once you have set up your UPS system, you may wish to test it. Make sure that the UPS has been charged for at least 4 hours before testing.
To test the UPS, simply depress the test button located on the front of the unit. The unit will cycle to battery and emit an audible beep. The unit will stop beeping when the test is complete.
You may also use the
Battery Replacement
Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery.
Service the battery under the supervision of personnel knowl- edgeable of batteries and their precautions. Servicing the bat- tery can only be performed by qualified personnel.
CAUTION! Use only the specified type of battery. See your dealer for replacement batteries.
CAUTION! The battery may present the risk of electrical shock. Do not dispose of batteries in a fire as they may explode. Follow all local ordinances regarding proper disposal of batteries.
CAUTION! Do not open or mutilate the batteries. Released elec- trolyte is harmful to the skin and eyes and may be toxic
CAUTION! A battery can present a high risk of short circuit cur- rent and electrical shock. Take the following precautions before replacing the battery:
1.Remove all watches, rings or other metal objects.
2.Only use tools with insulated handles.
3.Do not lay tools or metal parts on top of battery or any terminals.
4.Wear rubber gloves and boots.
5.Determine if the battery is inadvertently grounded. If inadver- tently grounded, remove source of ground. CONTACT WITH A GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK! The likelihood of such shock will be reduced if such grounds are removed during installation and maintenance (applicable to a UPS and a remote battery supply not having a grounded circuit).
10 |
| USA & Canada (800) |
