Others

Menus related to [ADVANCED] and [SETUP]

≥Underlined items are the initial shipping condition.

ª[REC LAMP]

≥[OFF]≥[ON]

The recording lamp lights during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording.

ª[DISPLAY]

≥[OFF]≥[ON]

The screen indications are selected as shown in the illustration below.

[OFF]

[ON]

HN

0h00m00s

30min

 

R30min

 

 

 

AUTO

 

 

15.12.2006

ª[POWER SAVE]

≥[OFF]

≥[5 MINUTES]

 

 

 

[OFF]:

The power saving function is not activated.

[5 MINUTES]:

When about 5 minutes have passed without any operation, this unit automatically turns off to prevent the battery from running down. When you use this unit, turn it on again.

≥In the following cases, the unit may not turn off even when you set this to [5 MINUTES].

–When using the AC adaptor

–When connecting the unit to a computer or printer via the USB cable

ª[BEEP SOUND]

≥[OFF]≥[ON]

This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended.

1 Beep

When you start recording When you turn on the power

When this unit is recognized by the computer or the printer etc.

2 Beeps

When you pause recording

When you turn off the power

2 Beeps/4 times

When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l 110)

ª[INITIAL SET]

≥[YES]≥[NO]

When there is a menu that cannot be selected due another function or mode being activated, set to [YES] for changing the menu settings back to the initial shipping condition.

(The language setting cannot be changed back to the initial shipping condition.)

ª[DEMO MODE]

≥[OFF]≥[ON]

This item is used to start the unit demonstration.

(Only when the mode dial is at the position) If you set [DEMO MODE] to [ON] without inserting an SD card, the demonstration automatically starts. If any operation takes place, the demonstration is canceled. However if no operations take place for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration, set [DEMO MODE] to [OFF] or insert an SD card. For normal use, set [DEMO MODE] to [OFF].

107

VQT1F36