Panasonic AG-HSC1UP Manual focus adjustment, About the MF assist function, 2Set the AUTO/MANUAL/FOCUS switch to MANUAL, [MF ASSIST] # [ON] and press the cursor button

Recording

Manual focus adjustment

If auto focusing is difficult due to the conditions, then manual focusing is available.

¬Rotate the mode dial to select .

1 (When MF assist function is used)

Press the MENU button, then select [ADVANCED] #

[MF ASSIST] # [ON] and press the cursor button.

≥The default setting is [ON].

2Set the AUTO/MANUAL/FOCUS switch to MANUAL.

AUTO

MANUAL

FOCUS

3Move the switch down and set it to FOCUS position.

AUTO

MANUAL

FOCUS

The manual focus indication [MF] and the icon shown in the illustration appear.

4Move the cursor button left or right to bring the subject into focus.

The center of the screen is enlarged. The normal screen returns approximately

2 seconds after you finish bringing the subject into focus.

≥The center of the screen is not enlarged when [MF ASSIST] is [OFF].

To restore to the automatic adjustment

Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position.

≥You can also restore the auto focusing by setting the AUTO/MANUAL/FOCUS switch to AUTO.

≥The subject may not be in focus when zoomed in if focusing with a wide angle. First, zoom in on the subject, and then focus on it.

About the MF assist function

The center of the screen is enlarged during manual focus adjustment. This allows you to focus on the subject more easily.

≥MF assist does not work if the zoom magnification is more than 12k.

≥The part of the screen that is enlarged is not enlarged on the image actually recorded.

≥The zebra pattern does not appear on the part of the screen that is enlarged when [ZEBRA] is [ON].

64

VQT1F36