With other products

7Select the layout setting on [PAGE LAYOUT].

[STANDARD]: Layout specific to the printer

[

]:

No frame print

[

 

]:

Frame print

 

≥You cannot set page layouts not supported on the printer.

8Select [PRINT] # [YES] and press the cursor button to print the pictures.

≥Exit PictBridge by disconnecting the USB cable (supplied) after the pictures have been printed.

When you stop printing halfway

Move the cursor button down.

A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the screen returns to step 2. If [NO] is selected, all the settings are kept and the screen returns to step 3.

≥Avoid the following operations during printing. These operations disable proper printing.

–Disconnecting the USB cable

–Removing the SD card

–Switching the mode dial

–Turning off the power

≥Check the settings for the paper size, print quality etc. on the printer.

≥The edges of still pictures recorded on this unit with a 16:9 aspect ratio may be cut at printing. When using a printer with a trimming or borderless printing function, cancel this function before printing. (Refer to the operating instructions of the printer for details.)

≥You may not be able to print still pictures recorded with other products.

≥When the unit is connected directly to the printer, the DPOF settings cannot be used.

≥Connect the printer directly to this unit. Do not use a USB hub.

91

VQT1F36