Editing
4 (Only when [SELECT] is selected in step 2)
Press the 
button.
5When the confirmation message appears, select [YES], then press the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps
To complete editing
Press the MENU button.
≥Scenes which cannot be played back (the
thumbnails are displayed as 
) cannot be deleted.
≥Protected scenes cannot be deleted.
≥Do not open the card slot cover while deleting. The deletion will stop.
≥In case of [ALL SCENES], the deletion may take time if there are many scenes on the SD
card.
≥Do not turn off this unit while deleting.
≥When you delete scenes, use a battery with sufficient battery power or use the AC adaptor.
≥If you delete scenes recorded on other products with this unit, all the data related to the scenes may be deleted.
Protecting scenes
This is for preventing scenes from being deleted by mistake.
Scenes can be protected so that they are not deleted by mistake. (Even if you protect some scenes on an SD card, formatting the SD card will delete them.)
¬Rotate the mode dial to select 
and then select the 
(motion picture playback) tab.
1Press the MENU button, then select [PLAY SETUP] # [SCENE PROTECT] # [YES] and press the cursor button.
2Select the scene to be protected and then press the center of the cursor button.
The [
] indication appears and the scene is protected.
≥Press the cursor button again to cancel the setting.
≥2 or more scenes can be set in succession.
To complete the settings
Press the MENU button.
75
VQT1F36