Setup

Setup

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery before using this unit.

≥Connect the battery to an AC adaptor to recharge it.

The battery cannot be recharged by simply inserting it into the unit.

≥If the DC cable is connected to the AC

adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor.

≥The Panasonic battery that can be used with this unit is VW-VBG130. Other Panasonic batteries will not work. (l 30)

A

1Connect the AC cable to the ACadaptor and the AC outlet.

≥Remove the DC cable beforehand.

2Put the battery on the battery mount by aligning the mark, andthen securely plug it in.

≥The output plug of the AC cable is not completely connected to the AC adaptor jack. As shown in A, there is a gap.

ªCharging lamp

Lights up: Charging

Goes off: Charging completed

Flashing: Make sure that the terminals of the battery or the AC adaptor are not exposed to dirt, foreign objects or dust, then reconnect them properly. Disconnect the AC cable from the AC outlet when you remove dirt, foreign objects or dust on the terminals of the battery or the AC adaptor.

If the charging lamp is still flashing, something may be wrong with the battery or AC adaptor. Contact your dealer.

≥Battery charging time (l 30)

≥We recommend using Panasonic batteries (VW-VBG130).

≥If you use other batteries, we cannot guarantee the quality of this product.

28

VQT1F36