
Recording
Self-timer recording
You can record still pictures on an SD card using the timer.
¬Rotate the mode dial to select .
1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration.
2Move the cursor button up to select [Ø].
Each time the cursor button is pressed up, the indication changes by one setting in the following order:
[Ø10] # [Ø2] # setting canceled Ø10: Records after 10 seconds
Ø2: Records after 2 seconds
3Press the PHOTO SHOT button.
A still picture is recorded after the [Ø10] or [Ø2] display and the recording lamp flashes for the time which has been set.
≥After recording, the
halfway and then fully in auto focus mode, the subject is focused when the button is
pressed halfway.
≥When you press the PHOTO SHOT button fully in auto focus mode, the subject is focused just before recording.
To stop the timer midway through
Press the MENU button. (The
≥The
≥The
Even if you press the recording start/stop button while the
≥Depending on the time taken to bring the subject into focus, the recording may take longer than set to start.
≥Setting the
Built-in flash
Use the
¬Rotate the mode dial to select .
1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration.
2Move the cursor button left to select [ß].
≥Each time the cursor button is pressed left, the indication changes by one setting in the following order: [FLASH ON] > [FLASH AUTO] > [FLASH OFF]
≥When the PHOTO SHOT button is pressed halfway, the flash indicator will appear in the bottom left corner of the screen. [FLASH ON]: ß
[FLASH AUTO]: ßA [FLASH OFF]:
57
VQT1F36