Panasonic AG-HSC1UP 111

	Others



CANNOT PROTECT.	Scenes on SD cards for which the top menu has been created with
	HD Writer Ver1.0E for SD1 cannot be protected. (l 75)
AGS MODE ON-REC	The AGS function is activated. (l 44)
PAUSED
PUSH THE RESET	An irregularity in the unit has been detected. Press the RESET
SWITCH.	button to restart the unit. (l 118)
CANNOT SET.	The [GUIDE LINES], [ZEBRA], [MF ASSIST] and [MIC LEVEL]
	menu settings cannot be set when the color bar is set.
CHANGE MODE TO USE	The USB cable is connected in recording mode.
USB.
DISCONNECT USB	You are attempting to switch the mode dial from PC Connection
CABLE.	mode to another mode with the USB cable connected.
PLEASE CONNECT AC	You are attempting to connect to a computer in PC Connection
ADAPTOR AND BATTERY.	mode when the AC adaptor is not connected or the battery is not
	inserted.
RECONNECT USB CABLE.	Disconnect the USB cable, then connect the AC adaptor with the
	battery inserted in this unit and reconnect the USB cable.
DISCONNECT USB	The unit cannot correctly establish the connection to the computer
CABLE.	or printer. Disconnect and then reconnect the USB cable.
DISCONNECT USB	When the unit is connected to a computer, its power cannot be
CABLE.	turned off.

111

VQT1F36

Contents

Page WARNING: Page Batteries Warning AC adaptor U.S.A./CANADA CONSUMERS: ATTENTION: IMPORTANT SAFETY INSTRUCTIONS WARNING CAUTION ªIndemnity concerning recording content IMPORTANT ªCarefully observe copyright laws ªCards that you can use with this Contents Before using Setup Recording Playback Editing Card management With other products With a computer Others Quick Guide ªInserting/removing an SD card ªRecording motion pictures ªRecording still pictures (JPEG) ªMotion picture playback ªStill picture (JPEG) playback Before using Features of the High Definition Video Camera Watching high definition images ªWhen connecting to a TV that does not have a HDMI terminal Using the remote control for the TV for playback ªOther linked operations Listening in 5.1 channel surround sound Saving the data on the SD card ªWhat you can do with HD Writer ªThe SD Media Storage Accessories Parts identification and handling Page Page Battery cable cover 1 Open the battery cover 3 Attach the battery pack holder kit 2Open the battery cable cover 4Close the battery cover Using grip belt 1Flip the belt 2Put your hand through the grip belt 3Replace the belt Lens hood Using the LCD monitor Using the remote control ªInstall a button-typebattery 1While pressing the stopper A, pull out the battery holder Set the ªRemote control usable range Cards that you can use with this unit ª(SD Speed Class Rating Class 2) ªHandling precautions Setup Charging the battery Inserting/removing the battery Charging time and recordable time Connecting to the AC outlet Selecting a mode (Turning the unit on/off) Quick start Inserting/removing an SD card How to use the cursor button Operations during recording 2Move the cursor button up, left or right to select an item Operations during playback 2Move the cursor button up, down, left or right to operate About the operation icons displayed in each mode Recording mode Playback mode (In motion picture playback) Playback mode ( In still picture playback) Using the menu screen 4Move the cursor button up or down in order to select the submenu item 5Move the cursor button right or press the cursor button 6Move the cursor button up or down in order to select the desired item 7Press the cursor button to enter the selection Operating with remote control Setting date and time Switching the language Adjusting LCD monitor Recording Before recording Auto Ground-Directional Standby (AGS) Recording motion pictures ªScreen indications in the recording mode ªWhen recording stops suddenly during motion picture recording Recording modes/recordable time available for the motion picture Recording still pictures (JPEG) About the screen indications only when the PHOTO SHOT button is pressed halfway ªAbout the focus indication ªConcerning the focusing area Switching the shutter effect on/off Press the MENU button, then select [PICTURE] # [SHTR EFFECT] # [ON] or [OFF] and press the cursor button Picture Quality/Approximate Number of Recordable Pictures on an SD Card Various recording functions Zoom in/out function Recording yourself Backlight compensation function Fade in/fade out function MagicPix function Soft skin mode Tele macro function Self-timerrecording Built-inflash Red eye reduction function To adjust the brightness of the flash Image stabilizer function Guide line function Wind noise reduction function Microphone level 2Move the cursor button left or right to adjust the microphone input level Zebra display Color bar Manual recording functions Scene mode Manual focus adjustment White balance Manual shutter speed/aperture adjustment Page Playback Motion picture playback ªAbout motion picture compatibility Skip playback (to the start of a scene) Press the : or 9 button on the remote control during playback Slow-motionplayback Frame-by-frameplayback To adjust the volume Move the volume lever to change the volume level Playing back motion pictures by date Repeat playback Resuming the previous playback Still picture (JPEG) playback ªAbout still picture compatibility Editing Editing scenes Deleting scenes Protecting scenes Editing still pictures Deleting still pictures Protecting still pictures DPOF setting Card management Formatting Formatting an SD card With other products With a TV 1Connecting with a HDMI cable (optional) 1Connect this unit and a TV with the HDMI cable (optional) 2Set the mode dial to to turn on the power 3Select the input channel on the TV 4Start playback on this unit ªAbout the settings when connecting with HDMI 2Listening in 5.1 channel sound 3Connecting with the component cable (supplied) and the AV cable (supplied) ªAbout the setting when connecting the component terminals ªIf the image or audio from this unit is not output on the TV 4 Connecting with the AV cable (supplied) 1 Connect this unit and a TV with the AV cable (supplied) 3Change the input channel on the TV Playback using EZ Sync (HDAVI Control 5Operate with the remote control for the TV Dubbing images onto a connected DVD recorder or video device With a printer (PictBridge) 7Select the layout setting on [PAGE LAYOUT] 8Select [PRINT] # [YES] and press the cursor button to print the pictures With a computer Before using with a computer What you can do with a computer Contents on provided CD-ROM End User License Agreement Operating environment ªOperating environment for the card reader function (mass storage) Installation Installing HD Writer Ver1.0E for SD1 Reading the operating instructions of the software applications Software application uninstallation Connection and recognition Connection and recognition procedures About the computer display To disconnect USB cable safely Verifying the unit is correctly recognized by the computer Using HD Writer Ver1.0E for SD1 6Click the [Start copying] button ªWriting back to an SD card 1Click the [Write data to media] Click If using Macintosh Others Menus and Indications Menu list Playback menus (motion picture playback) ª[PLAY SETUP] (still picture playback) Menus related to [ADVANCED] and [SETUP] Indications ªPlayback indications ªPC connection indications ªConfirmatory indications Messages Page About recovery Functions that cannot be used simultaneously Troubleshooting Page Page Page Page ªWhen connected to another device ª With a computer Cautions for use About the battery About the AC adaptor About the SD card About the miniSD Card LCD monitor Explanation of terms Page Specifications Page Page Optional accessories Limited Warranty (For USA Customers) IN THE USA IN PUERTO RICO LIMITED WARRANTY STATEMENT (For Canadian Customers) Index Page Spanish Quick Use Guide/Guía española para el uso rápido ªCarga de la batería ªInserción de la batería ªExtracción de la batería ªCómo encender la unidad ªInsertar/extraer una tarjeta SD ªGrabación de películas ªGrabación de fotografías (JPEG) ªReproducción de películas ªReproducción de fotografías (JPEG)