Setup

ªConcerning the SD card

≥Do not touch the terminals on the back of the SD card.

≥Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card. Save important data recorded on this unit to a PC using the USB cable (supplied), HD Writer Ver1.0E for SD1 etc. (l 102) (We recommend using

HD Writer Ver1.0E for SD1 to acquire data recorded on this unit.)

≥When using an SD card on which data has been written many times, the remaining time left for recording may be reduced. (l 46)

ªCard access lamp

≥When this unit accesses the SD card (reading, recording, playback, erasing etc.), the access lamp lights up.

≥If the following operations are performed when

the access lamp is lit, then the SD card or the

How to use the cursor button

This unit has a cursor button A for selecting functions, performing operations etc. so it is easy to operate this unit with one hand.

A

B

BOperating the operation icons and menu screens that are displayed

Basic operations

The following describes operations on the menu screen and selection of files on the thumbnail view screen etc.

Move the cursor button up, down, left, or right to select an item or scene, and then press the cursor button to set it.

1

recorded data may be damaged or this unit

may malfunction.

3

5

– Opening the card slot cover and removing

the SD card

– Operating the mode dial

– Removing the battery or disconnecting the

AC adaptor

4

2

1Select by moving up.

2 Select by moving down.

3 Select by moving left.

4 Select by moving right.

5 Press the cursor button to set the item.

≥Menu screen operations (l 39)

35

VQT1F36