Panasonic AJ-D455P operating instructions Operation

Setup menus

USER menu

<OPERATION>

	Item		Setting
										Description
No.	Superimposed	No.		Superimposed
	display			display
101	SHTL MAX	0000				⋅	16		This sets the maximum speed for shuttle operations.
		0001				⋅	32		0: 16⋅	normal speed
		0002				⋅	60		1: 32⋅	normal speed
									2: 60⋅	normal speed
									<Note>
									When a DV or DVCAM cassette is used, the 32⋅ speed will be
									set even if “⋅ 60” has been selected as this item’s setting.
102	FF. REW	0000				⋅	32		This sets the maximum speed for FF and REW operations.
	MAX	0001				⋅	60		0: 32⋅	normal speed
		0002			⋅ 100				1: 60⋅	normal speed
									2: 100⋅	normal speed
									<Note>
									When a DV or DVCAM cassette is used, the 32⋅ speed will
									be set regardless of what has been selected as this item’s
									setting.
103	AUDIO	0000				OFF			This sets the status until the audio signal is output when
	MUTE	0001				ON			operation switches from the stop or search modes to the play
									mode.
									0: The time until the audio is output is shortened.
									1: The audio is output after the status stabilizes.
									<Note>
									When set to 0 (OFF), the sound in the initially output part is
									incomplete. Therefore, this setting is not recommended for
									broadcasts.
104	REF	0000				OFF			This selects whether to warn the operator when the
	ALARM	0001				ON			REF.VIDEO signal has not been connected.
									0: Warning is not given.
									1: Warning is given by the flashing STOP lamp.
106	PLAY	0000						0	This set the play delay time in frame increments.
		.					.
	DELAY	.					.
		.					.
		0015					15
107	CAP.LOCK	0000					2F		This selects the capstan lock mode.
		0001					4F		0: 2F mode
									1: 4F mode
109	EJECT EE	0000				EE			For selecting the video and audio output status when the tape
	SEL	0001		BLACK					is ejected.
		0002		GRAY					0: EE mode
									1: Video blackens, audio mutes.
									2: The images appear in gray, and the sound is muted.
110	F/R EE SEL	0000				EE			This selects whether EE mode or playback mode is to be used
		0001		TAPE					during FF/REW operations.
									0: EE mode
									1: Playback mode
111	STOP EE	0000				EE			This selects whether EE mode or playback mode is to be used
	SEL	0001		TAPE					during stop mode.
									0: EE mode
									1: Playback mode
									<Note>
									This setting is complied with even in the standby OFF mode.
									However, the images will appear in gray when “TAPE” has
									been selected.
112	AUTO REW	0000				OFF			This selects whether to rewind the tape automatically to the
		0001				ON			tape start when the tape end is detected.
									0: The tape stops at the tape end.
									1: The tape is rewound to the tape start.

The underline on the setting item denotes the initial setting.

24