Controls and their functions
<Connector area>
qAC IN socket
wSIGNAL GND terminal
This is connected to the signal ground terminal on the component connected to the unit in order to reduce the noise. It is not a safety ground.
eFan motor
This motor drives the fan to cool down the unit.
rTIME CODE IN/OUT connectors
These are the time code input and output connectors.
tDIGITAL AUDIO IN/OUT connectors
These are the input and output connectors for the digital audio signals complying with the AES/EBU standard.
yANALOG COMPONENT VIDEO IN connectors
These are the analog component video signal input connectors.
uANALOG COMPOSITE VIDEO IN connectors and 75Ω termination switch These are the analog composite video signal input connectors.
The two connectors are connected by a
iREF VIDEO IN connectors and 75Ω termination switch These are the reference video signal input connectors. For termination, set the switch to ON.
oREMOTE connector
The unit’s operations can be controlled from an external component by connecting an external controller to the unit using this connector.
!0ANALOG AUDIO CH1/CH2 connectors
These are the analog audio CH1 and CH2 input connectors.
!1S1-VIDEO IN/OUT connectors
These are the
!2ANALOG COMPONENT VIDEO OUT connectors
These are the analog component video signal output connectors.
!3ANALOG COMPOSITE VIDEO OUT connectors
These are the analog composite video signal output connector. Video signals with a superimposed display can be output from the VIDEO OUT 3 connector. Whether a display is to be superimposed onto the signals is selected using the SUPER ON/OFF switch.
!4RS-232C connector
The unit’s operations can be controlled by a personal computer or other component which is connected to the unit using this connector.
!5ENCODER REMOTE connector
An external encoder controller is connected here to adjust the video output signal settings externally.
12
