Panasonic AJ-D455P operating instructions 6MONITOR OUT connector, 7ANALOG Audio OUT connectors

!6MONITOR OUT connector

The PCM audio CH1 and/or CH2 signals (or playback signals from the CUE track) are output to this connector. PCM audio signals are output in the PLAY mode and in the –0.43⋅(–0.5⋅) to +1⋅ speed range; at all other times, the CUE signals are automatically output.

<Notes>

•The speed in parentheses given for the speed range above applies when a DV or DVCAM cassette is used.

•Either CH1, CH2 or mixed (CH1+CH2) PCM audio signals are output depending on the position selected by the AUDIO MONITOR SELECT switch.

!7ANALOG AUDIO OUT connectors

These are the analog audio CH1 and CH2 output connectors.

!8SERIAL DIGITAL COMPONENT AUDIO VIDEO IN/OUT connectors (The AJ-YA455P, an optional accessory, is required.)

These are the input and output connectors for the digital component audio and video signals complying with the SMPTE259M-C or 272M-A standard.

!9DIGITAL VIDEO INTERFACE (IEEE1394) IN/OUT connector (The AJ-YAD455P, an optional accessory, is required.) This is the IEEE1394 interface input/output connector.

13