Lock mode can be set to protect the settings in the system files and user files (USER2 – USER5). Settings can no longer be changed when this mode is set.
To set and release the lock mode for the system files and user files use setup item No. 30 (MENU LOCK) and setup menu item No. A03 (MENU LOCK), respectively.
Setting and releasing the lock mode.
1 Press the MENU button.
2 While holding down the FILE button, press the 
or 
button, and select the file for which the lock mode is to be set or released.
3
Press the 
or 
button and move the cursor (∗ ) on the menu screen to setup item No. 30 (MENU LOCK) or setup menu item No. A03 (MENU LOCK) for the system or user file.
4
Press the 
or 
button, and select lock mode setting or release.
To set the lock: Select the 0001 (ON) setting.
To release the lock: Select the 0000 (OFF) setting.
When the lock has been set, “LOCKED” flashes on the menu screen. In addition, the counter display stops flashing and lights.
5
|
|
|
|
|
| LOCKED |
| ||
<USER2> | NO.000 – 0005 | |||
∗ 000 | 5s | |||
001 | CHARA | 5 | ||
002 | CHARA | 23 | ||
003 | DISPLAY SEL | T&STA | ||
004 | LOCAL ENA | ST&EJ | ||
005 | TAPE TIMER | ± 12h | ||
006 | SUPER |
|
| ON |
007 | CHARA TYPE | WHITE | ||
101 | SHTL MAX | X32 | ||
Press the SET button. The setting is now stored in the memory.
<Notes>
•The lock mode cannot be set for the USER1 file settings.
•Even if the RESET button is pressed, the files which has been set to the lock mode cannot be reset to the factory settings.
17
