Panasonic AJ-D455P operating instructions Interface

Setup menus

USER menu

<INTERFACE>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
201	9P SEL	0000				OFF	This selects whether the 9-Pin connector functions when the
		0001				ON	REMOTE/LOCAL switch has been set to REMOTE.
							0: Do not function
							1: Function
202	ID SEL	0000				OTHER	This selects the ID information which is returned to the
		0001		DVCPRO			controller.
		0002				ORIG	0: 20 25H
							1: DVCPRO’s, own ID is returned (F0 33H).
							2: The unit’s own ID (A0 3CH) is returned.
							<Note>
							Set “ORIG” only when the unit is connected with a Panasonic
							controller (such as the AJ-A900, optional accessory).
204	RS232C SEL	0000				OFF	These settings are for selecting whether the RS-232C con-
		0001				ON	nector is to function when the REMOTE/LOCAL switch is set
							to REMOTE.
							0: Connector does not function.
							1: Connector functions.
205	BAUD RATE	0000		300			These settings are for selecting the RS-232C communication
		0001		600			speed (baud rate).
		0002		1200
		0003		2400
		0004		4800
		0005			9600
206	DATA	0000		7			These settings are for selecting the RS-232C data length.
	LENGTH	0001			8		(Unit: bit)
207	STOP BIT	0000			1		These settings are for selecting the RS-232C stop bit length.
		0001			2		(Unit: bit)
208	PARITY	0000				NON	These settings are for selecting the none, odd or even for the
		0001				ODD	RS-232C parity bit.
		0002				EVEN	0: Parity bit is not used.
							1: An odd number of bits is used for the parity system.
							2: An even number of bits is used for the parity system.
209	RETURN	0000				OFF	These settings are for selecting whether the ACK code is to be
	ACK	0001				ON	returned when a command is received from RS-232C.
							0: ACK code is not returned.
							1: ACK code is returned.

The underline on the setting item denotes the initial setting.

26