Chapter 5 Preparation

Using the NP-1 type battery pack

1 Remove the battery holder.

2 Attach the NP-1 type battery case to the unit.

1Tighten the mounting screws.

2 Tighten the power contact screws.

3 Insert the top of the detached cover in the direction shown by the arrows.

4Align the holes in the bottom of the cover (metal part) with the holes at the bottom of the case, and use the

screws to attach the case.

 

 

5

<Note>

 

 

 

3 Set the battery type.

When mounting the battery holder, take care not to pinch

the connecting cord.

 

 

 

Select the battery type using the BATTERY SELECT

NP-1 type Battery case

 

menu item.

This item is selected from the

 

<BATTERY/TAPE> screen on the VTR FUNCTION page.

1

 

When using a nickel-cadmium battery which cannot be

 

selected using the BATTERY SELECT item setting,

 

 

 

 

select NiCd14(14V), NiCd13(13 V) or NiCd12(12 V),

 

 

whichever setting corresponds to the battery’s voltage,

 

 

and set the items that correspond to the characteristics of

 

 

the battery.

 

 

 

If the battery is not a nickel-cadmium battery, select

 

 

TYPE A or TYPE B, and set the items that correspond to

4

 

the characteristics of the battery.

 

For details, refer to “7-8-4 BATTERY SETTING2.”

2

3

 

 

 

 

 

 

 

<Note>

 

 

 

Address all inquiries concerning the V-mount adapter

 

 

plate to your dealer.

Using the V-mount type battery pack

Attach the V-mount adapter plate.

Insert it in the direction shown by the arrows, and slide it into place.

59