Chapter 2 Parts and their functions
=<> ; : 3 7
2
2
6
1
1MIC IN (microphone input) jack (XLR,
Connect the microphone (optional accessory) here. The power for the microphone is supplied from this jack.
2AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 recording level adjustment) controls
When the AUDIO SELECT CH1/CH2 switch 3 is set to MAN, the recording level of audio channels 1 and 2 can be adjusted using these controls.
The controls come with a locking mechanism. Therefore, to adjust the recording level, simultaneously push in and turn the controls.
3AUDIO SELECT CH1/CH2 (audio channel 1 & 2 automatic/manual level adjustment selector) switch
This is used to select the method for adjusting the recording levels of audio channels 1 and 2.
AUTO : Set here for automatic adjustment.
MAN : Set here for manual adjustment.
4AUDIO IN (audio input selector) switch
These are used to select the input signals to be recorded on audio channels 1 and 2.
FRONT :
The input signals supplied from the microphone which has been connected to the MIC IN jack 1 are recorded.
W.L. (wireless) :
The input signals from the
REAR :
The audio input signals supplied from the audio component which has been connected to the AUDIO IN CH1/CH2 connectors 5 are recorded.
The mixed signals of audio channels 1 and 2 are output to the remote control unit
The signals are output now as is without the adjustment of their level, etc.
8 ? |
|
|
4 ? @ 5 9 | ||
5AUDIO IN CH1/CH2 (audio input channel 1 & 2) connectors (XLR,
An audio component or microphones are connected here.
6LINE/MIC/+48V (line input/mic input/mic input + 48V) selector switch
This is used to switch the audio input signals from the audio component which has been connected to the AUDIO IN CH1/CH2 connectors 5.
LINE : The audio input signals from the audio component serving as the line input are selected.
MIC : The audio input signals from the internal power supply type of microphone are selected. (The phantom mic power is not supplied from the unit.)
+48V : The audio input signals from the external power supply type of microphone are selected. (The phantom mic power is supplied from the unit.)
7Wireless receiver slot
The UniSlot ® wireless receiver (optional accessory) can be attached here.
8FRONT AUDIO LEVEL (audio recording level adjustment) control
This enables the recording level of audio channels 1 and 2 to be adjusted. This level can be adjusted regardless of the setting position of the AUDIO SELECT switch.
When the <MIC/AUDIO1> screen is opened from the VTR MENU page by performing a menu operation, whether to enable or disable the operation of this level control can be set using the FRONT VR CH1 and FRONT VR CH2 setting items.
SDC905
O The same signals as for CH1 are recorded on audio track CH3. Similarly, the same signals as for CH2 are recorded on audio track CH4.
O The signals are recorded on two channels (CH1 and CH2) when the DVCPRO format (25 Mbps) is set.
9