Chapter 5 Preparation

Storing the lens file data

The white shading adjustment values can be stored in the unit as lens file data.

Selecting the file No.

1 Perform a menu operation to open the <LENS FILE> screen from the FILE page, and turn the JOG dial button to move the arrow (cursor) to the FILE NO. item.

2 When the JOG dial button is pressed, the file number starts flashing. Turn the JOG dial button and select the lens file (1 to 8) in which the data is to be stored.

< LENS FILE >

 

# FILE NO.

:1

READ

 

WRITE

 

TITLE : ************

1:5:

2:6:

3:7:

4:8:

3 Press the JOG dial button to enter the lens file.

Giving a title to the selected file NO.

4 Turn the JOG dial button to move the arrow (cursor) to the “TITLE:” item.

< LENS FILE >

 

FILE NO.

:1

READ

 

WRITE

 

#TITLE : ************

1:5:

2:6:

3:7:

4:8:

5 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.

< LENS FILE >

 

FILE NO.

:1

READ

WRITE

;

TITLE : ************

1:5:

2:6:

3:7:

4:8:

6 Press the JOG dial button again and turn it until the character to be set is displayed.

When the button is turned, the character displayed is switched in the following sequence:

Space: ∑ 7

letters: A—Z

7

numbers: 0—9 7

symbols: ’, >, <, /, –, •, a

7 Press the JOG dial button to enter the character.

8 Turn the JOG dial button to move the arrow (cursor) to the next position (right), and repeat steps 6 and 7 to set the characters. (No more than 12 characters may be entered.)

9 When the characters have been input, turn the JOG dial button to move the arrow (cursor) to the “:” position.

10 When the JOG dial button is pressed, the arrow (cursor) returns to the “TITLE:” item.

11 Turn the JOG dial button to move the arrow (cursor) to the “WRITE” item.

12 When the JOG dial button is pressed, the following message appears.

WRITE?

YES

#NO TITLE:

13 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button.

When writing is complete, “WRITE OK” is displayed, indicating that the setting data and title have been stored in the lens file area of internal memory.

14 Press the MENU button to exit the menu operations.

64