Panasonic AW-RC400N, AW-RP400N, AW-PH400P specification

Pan/Tilt Control Panel AW-RP400

Specifications

Supply voltage:	DC 12.0 V
Power consumption:	Approx. 13 W

1 indicates safety information.

Input connectors

DC 12V IN:

CONTROL IN FROM ROP: CONTROL IN FROM RCB: EXT CONT IN:

REMOTE:

Output connectors

CONTROL OUT TO

PAN/TILT HEAD:

MONI SEL OUT:

EXT CONT OUT:

Input/output connectors

INCOM (top panel):

TALLY/INCOM:

Switch functions:

XLR, 4 pins

D-SUB 29-pin, cable supplied with AW-CB400 remote operation panel 10-pin round connector, cable supplied with WV-CB700A

RJ45, additional AW-RP400 control signal input; 10BASE-T straight cable (UTP category 5), max. 500 meters

50-pin D-SUB connector, external control input, AW-CA50T9

RJ45, pan/tilt head control signal output; 10BASE-T straight cable (UTP category 5), max. 500 meters

RJ45, monitor switching signal output; 10BASE-T straight cable (UTP category 5), max. 50 meters

RJ45, additional AW-RP400 control signal output; 10BASE-T straight cable (UTP category 5), max. 500 meters

XLR, 4 pins D-SUB, 15-pin

TALLY: Contact input (Do not apply a voltage in excess of 5V to this connector.)

INCOM: 4-wire system

Master/slave switching, OPERATE control, home position, menu/limit switch, optional function operations, pan/tilt head selection, lens iris AUTO/MANU/LOCK switching, preset memory data operations, tracing memory data operations, call

AW-RP400

Adjustment functions:	LCD contrast, INCOM level, lens iris, zoom, focus, pan/tilt/rotation, zoom speed,
	focus speed, pan speed, tilt speed, rotation speed, menu settings
Ambient operating temperature: 14°F to 113°F (–10°C to +45°C)
Storage temperature:	–4°F to 140°F (–20°C to +60°C)
Ambient operating humidity:	30% to 90% (no condensation)
Dimensions (W!H!D):	12-5/8”!3-3/8”!10-1/2” (320!85!266 mm)
Weight:	Approx. 8.4 lbs (3.8 kg)
Finish:	Color resembling Munsell 3.5 paint

Weight and Dimensions indicated above are approximate.

Specifications are subject to change without notice.

37

Image 37

Panasonic AW-RC400N, AW-RP400N, AW-PH400P manual Supply voltage DC 12.0 Power consumption Approx W

Contents

AW-PH400 AW-RP400 AW-RC400 AW-RL400 AW-RL400 FCC Note Safety precautions Important Safety Instructions Contents ≥ Do not use the units outdoors ≥ Maintenance Operating precautions≥ Handle the units carefully Precautions for use AccessoriesIntroduction Installation precautions Parts and their function Pedestal Power ON/OFF switch Rotary head connector panel Pedestal connector panelBottom panel Prompter connector Tally lamp accessory @ SDI in connector SDI ND/EXT connector ND/EXTLens I/F 2 connector Lens I/F Option connector Option Connector Connector YSDI connector SDI L in connector G/L For installation on the ceiling For a stand-alone installation$ Assembling the pan/tilt head Attaching the camera mounting base Mounting the tally lamp For stand-alone installation $ Setting the mounting direction switchFor installation on the ceiling $ Setting the PCB switches $ Installing the pan/tilt head $ Mounting the camera ≥ Camera AW-E750 $ Attaching the wire≥ Camera AW-E650, AW-E350 Replacing the consumable parts Power consumption SpecificationsSupply voltage Memo Rack-mounting adaptors Mounting screws M4!8 mm Zoom switch Plug D-SUB 15-pin for tally/INCOM system $ Front panel Iris indicator PAN Position indicator= Zoom indicator Focus indicator PAN/TILT lever/ROTATION control switch Preset Memory selection buttons 1 toMemory button LCD panel Camera Control in from RCB P1 to P5 connectors EXT Cont IN/OUT connectorsTALLY/INCOM connector $ Rear panel Control OUT to PAN/TILT Head P1 to P5 connectors Remote connectorMoni SEL OUT connector Camera Control in from ROP connector $ Operation method Menu settings Menu item Setting Description Initial value $ List of menu items and settings Speed with Zoom POS. setting OFF/1/2/3 Tilt Range setting 190/300 degreesPreset Speed setting 1 to Iris Control setting BOTH/RP400/CB400 Memory Length setting 60s/120s/300s/600s Option Switch a to H settings Buzzer setting OFF/ON Control Select Mode setting INTERLOCK/UN-INTERLOCKAuto RUN setting Start No., END No., Interval SD Card setting How to mount the AW-RP400 in a rack Before changing the position, turn off the power How to change the position of the connector panel Before replacing the zoom switch, turn off the power How to replace the zoom switchSecure the zoom switch using the four screws Replacing the consumable parts Supply voltage DC 12.0 Power consumption Approx W Cable Compensation Unit AW-RC400 Power switch Front panel Power LEDCable length setting switches 0 to SHORT/LONG selector switch Video in connectors 1 to MONITOR1, 2 connectors BAC adaptor storage space= Pr/C in connectors 1 to Pb in connectors 1 to How to mount the AW-RC400 in a rack Ambient operating temperature Power consumption Approx W Pan/tilt head connecting cable Rotary ring Camera mounting screw U1/4-20UNC Pan/tilt head connectorCamera mounting plate a B Roll unit anchoring screw holes Installation When the AW-E655 is used as the camera When the AW-E750, AW-E650 or AW-E350 is used as the camera Camera mounting plate’s screws Pan/tilt head connector Supply voltage DC 24 Power consumption Approx WPerformance Connections Zoom/focus Control MONITOR1 MONITOR2 Example of system configuration $ Turning on the power Operating procedures $ Providing cable compensation for the cameras $ Video adjustments for the cameras $ Genlock adjustments for the respective cameras$ Tracing memory settings Setting the recording time and number of memories Playing the tracing memory data Registering the preset memory data $ Setting the preset memory dataChanging the tracing memory data Erasing the tracing memory data Playing the preset memory data Cable specifications Cable specifications When an RD lens made by Fujinon is used Page Page Page Panasonic Broadcast & Television Systems Company