Pan/tilt head connector, Performance | Panasonic AW-RP400N specs

Roll Unit AW-RL400

Specifications

Supply voltage:	DC 24 V
Power consumption:	Approx. 24 W

1 indicates safety information.

Pan/tilt head connector:	Connected to pan/tilt head using cable supplied
Performance:	Maximum load-bearing capability: 8.8 lbs (4 kg)
	Rotary range: 380 degrees (approx. ±190 degrees)
	Maximum operating speed: 60 degrees/sec.
	Repeatability: Less than ±1 degree
Ambient operating temperature: 32°F to 113°F (0°C to +45°C)
Storage temperature:	–4°F to 140°F (–20°C to +60°C)
Ambient operating humidity:	30% to 90% (no condensation)
Dimensions (W!H!D):	8-1/16”!7-13/16”!10-1/4” (205!198!260 mm)
Weight:	Approx. 8.6 lbs (3.9 kg)
Finish:	AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)

Weight and Dimensions indicated above are approximate.

Specifications are subject to change without notice.

48

Image 48

Panasonic AW-RP400N, AW-RC400N manual Supply voltage DC 24 Power consumption Approx W, Pan/tilt head connector, Performance

Contents

AW-RL400 AW-PH400 AW-RP400 AW-RC400 AW-RL400 Safety precautions FCC Note Important Safety Instructions Contents Operating precautions ≥ Do not use the units outdoors ≥ Maintenance≥ Handle the units carefully Accessories Precautions for useIntroduction Installation precautions Parts and their function Rotary head connector panel Pedestal connector panel Pedestal Power ON/OFF switchBottom panel Prompter connector Tally lamp accessory ND/EXT connector ND/EXT @ SDI in connector SDILens I/F 2 connector Lens I/F Option connector Option Connector Y ConnectorSDI connector SDI L in connector G/L For a stand-alone installation For installation on the ceiling$ Assembling the pan/tilt head Attaching the camera mounting base Mounting the tally lamp $ Setting the mounting direction switch For stand-alone installationFor installation on the ceiling $ Setting the PCB switches $ Installing the pan/tilt head $ Mounting the camera $ Attaching the wire ≥ Camera AW-E750≥ Camera AW-E650, AW-E350 Replacing the consumable parts Specifications Power consumptionSupply voltage Memo Zoom switch Plug D-SUB 15-pin for tally/INCOM system Rack-mounting adaptors Mounting screws M4!8 mm $ Front panel PAN Position indicator Iris indicator= Zoom indicator Focus indicator Preset Memory selection buttons 1 to PAN/TILT lever/ROTATION control switchMemory button LCD panel EXT Cont IN/OUT connectors Camera Control in from RCB P1 to P5 connectorsTALLY/INCOM connector $ Rear panel Remote connector Control OUT to PAN/TILT Head P1 to P5 connectorsMoni SEL OUT connector Camera Control in from ROP connector Menu settings $ Operation method $ List of menu items and settings Menu item Setting Description Initial value Tilt Range setting 190/300 degrees Speed with Zoom POS. setting OFF/1/2/3Preset Speed setting 1 to Iris Control setting BOTH/RP400/CB400 Option Switch a to H settings Memory Length setting 60s/120s/300s/600s Control Select Mode setting INTERLOCK/UN-INTERLOCK Buzzer setting OFF/ONAuto RUN setting Start No., END No., Interval SD Card setting How to mount the AW-RP400 in a rack How to change the position of the connector panel Before changing the position, turn off the power How to replace the zoom switch Before replacing the zoom switch, turn off the powerSecure the zoom switch using the four screws Replacing the consumable parts Supply voltage DC 12.0 Power consumption Approx W Cable Compensation Unit AW-RC400 Front panel Power LED Power switchCable length setting switches 0 to SHORT/LONG selector switch MONITOR1, 2 connectors BAC adaptor storage space Video in connectors 1 to= Pr/C in connectors 1 to Pb in connectors 1 to How to mount the AW-RC400 in a rack Power consumption Approx W Ambient operating temperature Pan/tilt head connecting cable Pan/tilt head connector Rotary ring Camera mounting screw U1/4-20UNCCamera mounting plate a B Roll unit anchoring screw holes Installation When the AW-E750, AW-E650 or AW-E350 is used as the camera When the AW-E655 is used as the camera Camera mounting plate’s screws Supply voltage DC 24 Power consumption Approx W Pan/tilt head connectorPerformance Connections Zoom/focus Control Example of system configuration MONITOR1 MONITOR2 Operating procedures $ Turning on the power $ Providing cable compensation for the cameras $ Genlock adjustments for the respective cameras $ Video adjustments for the cameras$ Tracing memory settings Setting the recording time and number of memories Playing the tracing memory data $ Setting the preset memory data Registering the preset memory dataChanging the tracing memory data Erasing the tracing memory data Playing the preset memory data Cable specifications Cable specifications When an RD lens made by Fujinon is used Page Page Page Panasonic Broadcast & Television Systems Company