Main Menu (continued)

About IP Mode

By selecting “MODE1”, you can convert IP through Frame Interpolation.

This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused 1 frame delay or more.

Factory preset setting value is “MODE1” recommended for normal use. Depending on images, in very rare cases, noise may occur on the screen. In such a case, “MODE 2” is recommended.

By selecting “MODE2”, you can convert IP through Field Interpolation.

Since MODE2 interpolates only within each Field, it is suitable to confirm interlace condition.

Depending on still images, etc., flickers may occur on the screen. In such a case, “MODE1” is recommended.

WB adjustment mode

You can adjust “WHITE BALANCE VAR1” - “WHITE BALANCE VAR3” (WB) by selecting “VAR1” - “VAR3” in “COLOR TEMP.” in the “VIDEO CONFIG” menu.

 

 

 

The underlined values are factory preset setting values.

Sub menu

Settings

Explanation

COLOR TEMP.∗1

USER 0 - 63

Used to select the color temperature that will become the

 

D93

basis for adjustments.

 

D65

<USER 0 - 63>Adjustable settings 0 - 63

 

D56

 

(color temperature around 3000K - 9300K)

 

 

<D93>

Color temperature around 9300K

 

 

<D65>

Color temperature around 6500K

 

 

<D56>

Color temperature around 5600K

GAIN RED

0 - 511

GAIN elements for RED are adjusted.∗2

 

(Factory presets

 

 

GAIN GREEN

GAIN elements for GREEN are adjusted.∗2

are values for color

GAIN BLUE

GAIN elements for BLUE are adjusted.∗2

temperature <D65>.)

 

∗ The presets are

 

 

 

values adjusted

 

 

 

before shipment from

 

 

 

factories.

 

 

BIAS RED

–512 - 511

BIAS elements for RED are adjusted.∗2

BIAS GREEN

(Factory preset settings:

BIAS elements for GREEN are adjusted.∗2

0)

BIAS BLUE

BIAS elements for BLUE are adjusted.∗2

 

RESET

 

“GAIN RED” - “BIAS BLUE” values are reset to color temperatures

 

 

values selected in “COLOR TEMP.”.

∗1 When “COLOR TEMP.” is selected and [ENTER] is pressed following item change, the display changes to the confirmation screen. Selecting “YES” and pressing [ENTER] on this screen return GAIN and BIAS values to the selected color temperature values.

∗2 When adjusting, the item display moves to the lower part of the screen.

20