REMOTE Specifications
REMOTE operation is possible on this monitor using the
GPI terminal
Each of the items in the GPI screen are compatible with the following terminals. You can assign functions to each terminal in the menu GPI screen (→ page 28).
The functions assigned to each terminal operate when the GND (Pin 5) is connected (ON) or open (OFF).
| Pin number | Signal |
| 1 | GPI1 |
GPI Terminal (9P) | 2 | GPI2 |
3 | GPI3 | |
| 4 | GPI4 |
| 5 | GND |
| 6 | GPI5 |
| 7 | GPI6 |
| 8 | GPI7 |
| 9 | GPI8 |
Operating conditions
Level operation: operates when GND is connected.
Edge operation: operates when GND changes from
open to connected.
∗If you have assigned a level operation function to more than one terminal, the function operates as long as one of the terminals is connected.
Assignment items | Function | Operating conditions |
UNDEF | No settings (no terminal assignment functions) | — |
MARKER1 | Switches the marker display of the marker decided | Level operation |
ON/OFF∗1 | in “GPI PRESET1” (→ page 17) in the “MARKER” | (Connected: ON, Open: OFF) |
| menu. |
|
MARKER2 | Switches the marker display of the marker decided | Level operation |
ON/OFF∗1 | in “GPI PRESET2” (→ page 17) in the “MARKER” | (Connected: ON, Open: OFF) |
| menu. |
|
MARKER | Reduces the brightness of the background outside | Level operation |
BACK HALF∗2 | the marker displayed in “GPI PRESET1” (→ page | (Connected: ON, Open: OFF) |
| 17) by 50%. |
|
MARKER | Reduces the brightness of the background outside | Level operation |
BACK BLACK∗2 | the marker displayed in “GPI PRESET1” (→ page | (Connected: ON, Open: OFF) |
| 17) to 0%. |
|
CENTER MARKER | Switches the center marker display ON/OFF. | Level operation |
| (When other markers are being displayed, this is | (Connected: ON, Open: OFF) |
| superimposed on the other markers) |
|
INPUT SEL. VIDEO | Switches the input line to VIDEO. | Edge operation |
INPUT SEL. YPBPR | Switches the input line to YPBPR. | Edge operation |
INPUT SEL. VF | Switches the input line to VF. | Edge operation |
INPUT SEL. SDI | Switches the input line to SDI. | Edge operation |
SD ASPECT | Sets the aspect ratio settings when using SD signal | Level operation |
| input. (Disabled when using HD signal) | (Connected: 16:9, Open: 4:3) |
RED TALLY | Lights the red tally. | Level operation |
|
| (Connected: ON, Open: OFF) |
GREEN TALLY | Lights the green tally. | Level operation |
|
| (Connected: ON, Open: OFF) |
MONO | Switches between color and monochrome (MONO). | Level operation (Connected: |
|
| Monochrome, Open: Color) |
PIXEL TO PIXEL | Switches the screen display between input size and | Level operation |
| display size. | (Connected: ON, Open: OFF) |
Displays in red the section of the image that is being | Level operation | |
| focused. | (Connected: ON, Open: OFF) |
∗1 When the 16:9 marker and 4:3 marker are simultaneously selected and activated on the 16:9 aspect display, both markers are displayed.
∗2 When the 16:9 marker and 4:3 marker are simultaneously displayed, the background selected with the 16:9 marker is controlled.
Restrictions
•SD ASPECT does not operate when the input signal is HD.
•MARKER items do not operate when the VF input line is selected.
31