Main Menu (continued)

VF CONFIG

 

 

The underlined values are factory preset setting values.

Sub menu

Settings

Explanation

VF CONTROL

VF-CH

Used to select the input line for the VF function of the monitor.

 

ALL-CH

(VF function: tally lamp lit, zebra displayed, displayed)

 

 

<VF-CH> Only enabled when the VF line is selected.

 

 

<ALL-CH> Enabled with all input lines.

CROSS HATCH

HIGH

Used to set whether to display a cross hatch and select its density

 

LOW

level.

 

OFF

<HIGH> 70/256 (displays with a dense cross hatch)

 

 

<LOW> 20/256 (displays with a light cross hatch)

 

 

<OFF> Not displayed.

REAR TALLY

ON

Used to allow control of the tally lamp on the rear of the monitor.

 

OFF

<ON> Lamp lights when TALLY control from a GPI/camera is ON.

 

 

<OFF> Lamp does not light.

ZEBRA

ON

Used to set ZEBRA information in the camera.

 

OFF

<ON> Sets the information to ON.

 

 

<OFF> Sets the information to OFF.

RETURN CH∗1∗2

YPBPR

Used to select the signal input line by operating the RETURN (RET)

 

VF

button of the camera lens.

 

VIDEO

<Note>

 

SDI

When there is no SDI input unit (option), the SDI item is displayed in

 

 

gray and cannot be set.

• The priority sequence for GPI control and RS-232C is as follows: GPI > VF CONFIG > RS-232C.

∗1 RETURN CH operates when VF CONTROL is set to ALL-CH. It is not affected by the various line ON/OFF settings in the INPUT SELECT menu (→ page 29). (Input lines that are set with RETURN CH are enabled even if they are set to OFF in INPUT SELECT.)

∗2 A function to be used with future Panasonic camera-recorders.

22