Main Menu (continued)

FUNCTION

 

 

The underlined values are factory preset setting values.

Sub menu

Settings

Explanation

FUNCTION1 - 3

BLUE ONLY

Used to select the functions to be assigned to individual buttons

 

SD ASPECT∗1∗2

[FUNCTION1] to [FUNCTION3] (front-panel buttons).

 

WFM

<BLUE ONLY>

 

MARKER∗1∗3

Used to cut the red and green signals. You can check the hue (PHASE)

 

PIXEL TO PIXEL∗4

and depth of color (CHROMA). This is switched between ON/OFF by

 

PIXEL POS.+∗5

pushing the button.

 

PIXEL POS.–∗5

<SD ASPECT>

 

FOCUS-IN-RED

Used to switch between “16:9” and “4:3”.

 

∗4∗7

<WFM>

 

ZEBRA

Used to display the waveform display screen.

 

REAR TALLY∗6

<MARKER>

 

CROSS HATCH

Used to display the marker.

 

MONO∗1

<PIXEL TO PIXEL>

 

UNDEF

Used to switch the screen display between input size and display

 

 

size.

 

(Factory preset

<PIXEL POS.+>

 

setting→

During PIXEL TO PIXEL display, used to move the signal display

 

FUNCTION1:

position clockwise and display it.

 

WFM

<PIXEL POS.–>

 

FUNCTION2:

During PIXEL TO PIXEL display, used to move the signal display

 

PIXEL TO PIXEL

position counterclockwise and display it.

 

FUNCTION3:

<FOCUS-IN-RED>

 

FOCUS-IN-RED)

Used to highlight in red the section of the image that is being

 

 

focused.

 

 

<ZEBRA>

 

 

Used to set the zebra display ON or OFF for the camera.

 

 

<REAR TALLY>

 

 

Used to set the rear tally ON or OFF.

 

 

<CROSS HATCH>

 

 

Used to display a cross hatch.

 

 

<MONO>

 

 

Used to switch the display between color and black-and-white.

 

 

<UNDEF>

 

 

Undefined.

FUNCTION

ON1

Used to display the functions assigned from [FUNCTION1] to

DISPLAY∗8

ON2∗9

[FUNCTION3] (buttons on the front panel). The button action can also

 

OFF

be selected (1-touch, 2-touch, OFF).

 

 

<ON1>

 

 

Function display and function operation can be performed with one

 

 

touch.

 

 

<ON2>

 

 

Function display and function operation can be performed with two

 

 

touches.

 

 

<OFF>

 

 

Function not displayed.

• If a FUNCTION button is pushed during the picture adjusting knobs display, the picture adjusting knobs display will be cancelled and the FUNCTION operation cannot be executed.

∗1 The control settings do not operate during GPI operation.

∗2 If these settings are changed, the menu settings will also change.

∗3 Not displayed when 16:9, 4:3, BACK and CENTER are all OFF in the MARKER menu settings. ∗4 SD ASPECT cannot be switched when PIXEL TO PIXEL is ON during SD display.

∗5 PIXEL POSITION is not backed up. It is always CENTER when the power supply is switched ON. ∗6 Only enabled when TALLY control from the camera is ON.

∗7 During FOCUS-IN-RED operation, the detection sensitivity can be changed with the FOCUS-R knob. The setting range is from 0 to 30, with 30 the most sensitive detection.

∗8 The operating status is displayed regardless of the ON/OFF setting.

∗9 The function displayed with the ON2 setting can be operated with a button only during the time that it is displayed.

23