Controls and Their Functions (continued)

Rear panel

7

17

8

9

7

 

SDI

 

VIDEO/

 

 

(OPTION)

 

Y

 

PRPB

VF

GPI

RS-232C

DC IN

10

11

12

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18

 

16

 

15

 

 

17

 

 

14

 

18

7REAR TALLY (red)

Can be lit by a control signal from a GPI/camera.

8SDI (HD/SD) input terminal (BNC) - option

This is the SDI input terminal. (Compatible with HD/SD automatic switching)

• If you want this input, contact the vendor where you purchased the unit.

9VIDEO/Y input terminal (BNC)

This is the VIDEO signal (component signal) input terminal/Y input terminal.

10PBPR input terminal (BNC)

This is the PBPR signal (analog component signal) input terminal.

11VF terminal (D-SUB, 15 pins)

This terminal connects to the VF (viewfinder) terminal of broadcasting and business cameras made by Panasonic.

The unit can be used as the viewfinder for such a camera.

12GPI input terminal (D-SUB, 9 pins)

External control is possible by using a GPI signal.

13RS-232C terminal (D-SUB, 9 pins)

External control is possible by using an RS-232C interface.

14DC IN terminal (XLR, 4 pins)

This is the external DC power supply input terminal.

When a DC power supply is connected concurrently with the battery, the external power input takes precedence.

15Light control switch

This is not used on this monitor.

16Battery holder

This holder is used with a battery made by Anton/Bauer.

17Screw holes for tripod fixing

There are two screw holes on both the top and bottom for fixing the unit to a tripod (compatible with 3/8-16UNC). In addition, removable screw spacers are installed in one of the screw holes on the bottom of the unit, which are compatible with 1/4-20UNC screws. Use the size that matches the diameter of the tripod’s fixing screw.

18Screw holes for fixing

There are four screw holes (M3) for fixing the mounter on the rear of the unit, two each on the left and right.

8